Energy Distribution Without A Control Cabinet

October 8, 2019

THREE QUESTIONS FOR MEINRAD BRAUN, PRODUCT MANAGER POWER BUS SYSTEMS FOR INDUSTRY AT WIELAND ELECTRIC

Mr. Braun, the major trends in machine building are digitization, modularization, and decentralization. What role does installation without a control cabinet play in this?

Installation without a control cabinet makes sense anywhere where equipment or drives have to be supplied with energy, or signals have to be transmitted and processed, over long distances. It is particularly suited to large machines and systems and can be used anywhere where cabling from the central control cabinet to the field can sensibly be replaced with power bus solutions and fieldbus communication. But this is not about turning one cabinet into many small cabinets with the same functions; instead the idea is to create greater benefit by adding more functions to the components. A good example here is on-site diagnostics. If a decentralized motor starter has an operating status indicator, it is possible to identify immediately on-site what is or is not happening in this branch if a fault occurs. Consequently, there is no longer any running back and forth between the control cabinet and the location of the fault. Instead the fault can be rectified quickly and the system is back up and running in no time.

Where specifically can decentralized installation be used, and what are the benefits?

One field of application would be logistics, where plants transport goods over hundreds of meters or even kilometers. Here the individual drives also have to be supplied with electrical energy. If this is realized with a central control cabinet, then not only unimaginable quantities of cables but also huge cable trays are required, increasingly turning the electrical installation into an intolerable mess of materials. The same applies to factory automation, especially supplies to production cells. Here too a large number of appliances have to be connected over large distances. On the basis of a power bus system, the work involved at central control cabinets can be reduced to the main distribution. This saves on costs and makes the planning for the plant more flexible because fewer control cabinets need to be considered. Secondly, the flat cable system offers the advantage that the taps for the drives can be positioned flexibly. Incidentally, the same also applies to the feed-in point in order to balance out the load on the power bus. As a result, the power load on the cable can be utilized fully while preventing any overload. Compared with traditional point-to-point cabling with terminal boxes, this type of installation is less prone to errors and much easier and faster to install. Its strengths are also evident when it comes to modifications. No cabling is required as the power bus is already there. In addition, the connection is established without baring and stripping but with insulation-piercing contacts. The whole process couldn’t be faster.

What solutions does Wieland provide for energy distribution without a control cabinet, and how does the cost work out compared with conventional installations?

We are very clearly laying the foundations here with our podis® power bus system. Alongside the components for decentralized 400 V structures, we are drawing attention again to 24 V distribution this year. To this end, we have included a powerful, decentralized power supply unit and branches with overcurrent protection in the portfolio. These components enable us to offer our customers the advantages of decentralized energy distribution for extra-low-voltage networks as well. The same applications are the reason for this endeavor too, namely machines and plants that span large distances, such as those found in logistics centers and factory automation. While it may be true that the material costs of the decentralized system are slightly higher than those of standard components, the pay-back occurs as early as the installation process. For one thing, this takes just a fraction of the time. As we show in this video comparison, it takes just a tenth to a third of the time to realize the same installation with the podis® system and with no mixed-up cables, open contact points, or cut insulation. Added to that, it is the modular design and decentralized structure that make it possible to adapt plants to new requirements time and again over their operating lifecycle, to keep the plant’s availability high, and thereby to improve productivity. It is not so much the procurement price that is important; the decision on an investment comes down to productivity.

Find out more at www.wieland-electric.com.

Related Articles


Changing Scene

  • SEW-Eurodrive: MAXOLUTION System Solutions

    SEW-Eurodrive: MAXOLUTION System Solutions

    Whether in production or logistics operations, MAXOLUTION is synonymous with innovation in factory automation – across all industries and worldwide – helping you achieve your vision of an adaptable and resilient lean smart factory. Under the MAXOLUTION brand, SEW-EURODRIVE creates customized solutions for cutting-edge materials handling technology – from the shop floor through to IT.… Read More…

  • 6 Ways the New maxon Website Enhances Your Experience

    6 Ways the New maxon Website Enhances Your Experience

    maxon develops drives that are among the best in the world. They advance technologies that save lives on Earth, make driving and flying safer, and enable the use of robots in space. Where uncompromising precision and the highest quality standards are crucial for success, their drive systems show what they are made of. Complexity is… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Making the Sustainable Transformation of the Process Industry a Success

    Making the Sustainable Transformation of the Process Industry a Success

    By Krystie Johnston and Dr. Manfred Jagiella – Sustainability facilitates opportunity when approached with a mindset to preserve resources and promote circularity. We share one Earth, and it is our global responsibility to care for it for the next generation. Endress+Hauser is one global company that understands this responsibility – and practices it as well.… Read More…

  • Why NOARK’s 12VDC Shunt Trip Coils for MCCBs Make Power Systems Reliable and Safer

    Why NOARK’s 12VDC Shunt Trip Coils for MCCBs Make Power Systems Reliable and Safer

    Circuit breakers are an essential component of any modern electrical system. Designed to protect your home or business from potential overloads or short circuits, these devices are your first line of defense against electrical fires. There are, however, situations where remote tripping of the circuit breaker may be required. It could be for operational reasons,… Read More…